Light-induced degradation of dimethylmercury in different natural waters.

Photo-induced degradation of dimethylmercury (DMHg) is considered to be an important source for the generation of methylmercury (MMHg). However, studies on DMHg photodegradation are scarce, and it is even debatable about whether DMHg can be degraded in natural waters. Herein, we found that both DMHg and MMHg could be photodegraded in three natural waters collected from the Yellow River Delta, while in pure water only DMHg photodegradation occurred under visible light irradiation. The effects of different environmental factors on DMHg photodegradation were investigated, and the underlying mechanisms were elucidated by density functional theory calculations and a series of control experiments. Our findings revealed that the DMHg degradation rate was higher in the tidal creek water compared to Yellow River, Yan Lake, and purified water. NO3-, NO2-, and DOM could promote the photodegradation with DOM and NO3- showing particularly strong positive effects. Different light sources were employed, and UV light was found to be more effective in DMHg photodegradation. Moreover, MMHg was detected during the photodegradation of DMHg, confirming that the photochemical demethylation of DMHg is a source of MMHg in sunlit water. This work may provide a novel mechanistic insight into the DMHg photodegradation in natural waters and enrich the study of the global biogeochemical cycle of Hg.

Phthalate acid esters: A review of aquatic environmental occurrence and their interactions with plants.

The increasing use of phthalate acid esters (PAEs) in various applications has inevitably led to their widespread presence in the aquatic environment. This presents a considerable threat to plants. However, the interactions between PAEs and plants in the aquatic environment have not yet been comprehensively reviewed. In this review, the properties, occurrence, uptake, transformation, and toxic effects of PAEs on plants in the aquatic environment are summarized. PAEs have been prevalently detected in the aquatic environment, including surface water, groundwater, seawater, and sediment, with concentrations ranging from the ng/L or ng/kg to the mg/L or mg/kg range. PAEs in the aquatic environment can be uptake, translocated, and metabolized by plants. Exposure to PAEs induces multiple adverse effects in aquatic plants, including growth perturbation, structural damage, disruption of photosynthesis, oxidative damage, and potential genotoxicity. High-throughput omics techniques further reveal the underlying toxicity molecular mechanisms of how PAEs disrupt plants on the transcription, protein, and metabolism levels. Finally, this review proposes that future studies should evaluate the interactions between plants and PAEs with a focus on long-term exposure to environmental PAE concentrations, the effects of PAE alternatives, and human health risks via the intake of plant-based foods.

Confounding effects of seasonality and anthropogenic river regulation on suspended particulate matter-driven mercury transport to coastal seas.

Riverine mercury (Hg) is mainly transported to coastal areas in suspended particulate matter (SPM)-bound form, posing a potential threat to human health. Water discharge and SPM characteristics in rivers vary naturally with seasonality and can also be arbitrarily disrupted by anthropogenic regulation events, but their effects on Hg transport remain unresolved. Aiming to understand the confounding effects of seasonality and anthropogenic river regulation on Hg and SPM transport, this study selected the highly sediment-laden Yellow River as a representative conduit. Significant variations in SPM concentrations (108 - 7097 mg/L) resulted in fluctuations in total mercury (THg, 3.79 - 111 ng/L) in river water corresponding to seasonality and anthropogenic water/sediment regulation. Principal component analysis and structural equation model revealed that SPM was the essential factor controlling THg and particulate Hg (PHg) in river water. While SPM exhibited equilibrium state in the dry season, a net resuspension during the anthropogenic regulation and net deposition in the wet season demonstrated the impact of SPM dynamics on Hg distribution and transport to coastal regions. Combining water discharge, SPM, and Hg concentrations, a modified model was developed to quantify Hg flux (2256 kg), over 98% of which was in particulate phase.

An improved method for rapid and safe preparation and measurement of dimethylmercury using gas chromatography-atomic fluorescence spectrometry.

Transformations between dimethylmercury (DMHg) and other mercury (Hg) species have been one of the critical knowledge gaps in the Hg global biogeochemical cycle due to the lack of detailed studies. The preparation and measurement of DMHg are challenging due to the high toxicity and volatility of DMHg. In this work, we invented a new DMHg generator for successfully preparing high-purity DMHg in a highly controllable and safe way. The DMHg could be spontaneously volatilized and diffused from the original preparation solution to the solution to be studied. The parameters for generating DMHg were optimized to be the pH value of 4.0 with a MeCo/Hg2+ molar ratio of 10 at 20 °C. The following measurement method of DMHg in the presence of various species of Hg was also investigated and optimized. Hg0 and DMHg could be separated effectively with the carrier gas flow rate of 15 mL min-1 and the gas chromatography column temperature of 30 °C. The interferences of Hg0, monomethylmercury and other species were excluded by systematic control experiments. A sensitive and reliable approach for quantifying trace DMHg in water was developed. Under the optimal conditions, the limits of detection for Hg0, MMHg and DMHg were 0.03, 0.002 and 0.024 ng L-1, respectively, with the relative standard deviation below 8.2%. The developed method was validated by the determination Hg species of different natural water samples. This work is expected to provide a new and safe strategy for DMHg preparation and a verified method for DMHg measurement.

Plasmonic nanomaterials for solar-driven photocatalysis.

Plasmonic nanomaterials have spurred significant research interest in enhanced solar-driven photocatalysis due to their strong localized surface plasmon resonance (LSPR). As this rapid-developing research area has begun to raise and answer fundamental questions that determine the photocatalytic performance of plasmonic photocatalysts, it is an opportune time to evaluate the advancement and propose future trajectories. We first outline the fundamentals of LSPR, including its excitation, decay, and influencing factors. We then discuss three main enhancement mechanisms and their applicable scenarios for plasmonic photocatalysis. We then critically assess the recent works performed by our groups concerning plasmon-enhanced photocatalytic reactions. By introducing related works from other researchers, we demonstrate our contributions to the advancements of plasmonic photocatalysis. Finally, we discuss the current challenges and suggest future directions in three aspects: material development, mechanism exploration, and application extension. It is anticipated to delineate the state-of-the-art and direct future research in plasmon-enhanced value-added chemical transformations.

Harvesting mechanical energy for hydrogen generation by piezoelectric metal-organic frameworks.

Piezocatalysis, the process of directly converting mechanical energy into chemical energy, has emerged as a promising alternative strategy for green H2 production. Nevertheless, conventional inorganic piezoelectric materials suffer from limited structural tailorability and small surface area, which greatly impedes their mechanically driven catalytic efficiency. Herein, we design and fabricate a novel UiO-66(Zr)-F4 metal-organic framework (MOF) nanosheet for piezocatalytic water splitting, with the highest H2 evolution rate reaching 178.5 µmol g-1 within 5 h under ultrasonic vibration excitation (110 W, 40 kHz), far exceeding that of the original UiO-66 host. A reduced bandgap from 2.78 to 2.43 eV is achieved after introducing a fluorinated ligand. Piezoresponse force microscopy measurements demonstrate a much stronger piezoelectric response for UiO-66(Zr)-F4, which may result from the polarity of the introduced fluorinated ligand. This work highlights the potential of MOF-based porous piezoelectric nanomaterials in harvesting mechanical energy to drive chemical reactions such as water splitting.

Demand-oriented construction of Mo3S13-LDH: A versatile scavenger for highly selective and efficient removal of toxic Ag(I), Hg(II), As(III), and Cr(VI) from water.

Inspired by the classic ion-exchange reaction, a single phase material of Mg0.66Al0.34(OH)2(Mo3S13)0.03(NO3)0.14(CO3)0.07·H2O (Mo3S13-LDH) was masterly constructed by intercalating Mo3S132- into the MgAl-LDH gallery. Prepared Mo3S13-LDH displays excellent binding affinity and high selectivity for Ag(I) and Hg(II) in a mixed solution, in which an apparent selectivity order of Hg(II) > Ag(I) ≫ Pb(II), Cu(II), Ni(II), Co(II), Cd(II), and Mn(II) is observed. Enormous capture capacities (qmAg = 446.4 mg/g, qmHg = 354.6 mg/g) and fast equilibration time (within 60 min) place Mo3S13-LDH in the upper ranks of materials for such removal. For oxoanions, As(III) (HAsO32-) and Cr(VI) (CrO42-) can be specifically trapped by Mo3S13-LDH with comparable loading ability (qmAs = 61.8 mg/g, qmCr = 90.6 mg/g) in the coexistence of multiple interfering anions. Notably, high Hg(II) and Cr(VI) concentrations are finally reduced below the safe limit of drinking water. The excellent capture capacity of Mo3S13-LDH benefits from the rational design by following two aspects: (i) the multiple sulfur ligands in Mo3S132- groups give place to various capture modes and different affinity orders for target ions, and (ii) large-sized Mo3S132- groups widen the interlayer spacing of LDH, thereby accelerating the mass transfer process. Furthermore, the satisfactory structural stability of Mo3S13-LDH is also reflected through the unchanged hexagonal prismatic shape after adsorption. All of these highlight the great potential of Mo3S13-LDH for the application in water remediation.

Rational Design and Synthesis of Novel Dual PROTACs for Simultaneous Degradation of EGFR and PARP.

Inspired by the success of dual-targeting drugs, especially bispecific antibodies, we propose to combine the concept of proteolysis targeting chimera (PROTAC) and dual targeting to design and synthesize dual PROTAC molecules with the function of degrading two completely different types of targets simultaneously. A library of novel dual-targeting PROTAC molecules has been rationally designed and prepared. A convergent synthetic strategy has been utilized to achieve high synthetic efficiency. These dual PROTAC structures are characterized using trifunctional natural amino acids as star-type core linkers to connect two independent inhibitors and E3 ligands together. In this study, gefitinib, olaparib, and CRBN or VHL E3 ligands were used as substrates to synthesize novel dual PROTACs. They successfully degraded both the epidermal growth factor receptor (EGFR) and poly(ADP-ribose) polymerase (PARP) simultaneously in cancer cells. Being the first successful example of dual PROTACs, this technique will greatly widen the range of application of the PROTAC method and open up a new field for drug discovery.

Phase-enabled metal-organic framework homojunction for highly selective CO2 photoreduction.

Conversion of clean solar energy to chemical fuels is one of the promising and up-and-coming applications of metal-organic frameworks. However, fast recombination of photogenerated charge carriers in these frameworks remains the most significant limitation for their photocatalytic application. Although the construction of homojunctions is a promising solution, it remains very challenging to synthesize them. Herein, we report a well-defined hierarchical homojunction based on metal-organic frameworks via a facile one-pot synthesis route directed by hollow transition metal nanoparticles. The homojunction is enabled by two concentric stacked nanoplates with slightly different crystal phases. The enhanced charge separation in the homojunction was visualized by in-situ surface photovoltage microscopy. Moreover, the as-prepared nanostacks displayed a visible-light-driven carbon dioxide reduction with very high carbon monooxide selectivity, and excellent stability. Our work provides a powerful platform to synthesize capable metal-organic framework complexes and sheds light on the hierarchical structure-function relationships of metal-organic frameworks.

Furin: A Potential Therapeutic Target for COVID-19.

COVID-19 broke out in the end of December 2019 and is still spreading rapidly, which has been listed as an international concerning public health emergency. We found that the Spike protein of SARS-CoV-2 contains a furin cleavage site, which did not exist in any other betacoronavirus subtype B. Based on a series of analysis, we speculate that the presence of a redundant furin cut site in its Spike protein is responsible for SARS-CoV-2's stronger infectious nature than other coronaviruses, which leads to higher membrane fusion efficiency. Subsequently, a library of 4,000 compounds including approved drugs and natural products was screened against furin through structure-based virtual screening and then assayed for their inhibitory effects on furin activity. Among them, an anti-parasitic drug, diminazene, showed the highest inhibition effects on furin with an IC50 of 5.42 ± 0.11 µM, which might be used for the treatment of COVID-19.

Recent advances of near infrared inorganic fluorescent probes for biomedical applications.

Near infrared (NIR)-excitable and NIR-emitting probes have fuelled advances in biomedical applications owing to their power in enabling deep tissue imaging, offering high image contrast and reducing phototoxicity. There are essentially three NIR biological windows, i.e., 700-950 nm (NIR I), 1000-1350 nm (NIR II) and 1550-1870 nm (NIR III). Recently emerging optical probes that can be excited by an 800 nm laser and emit in the NIR II or III windows, denoted as NIR I-to-NIR II/III, are particularly attractive. That is because the longer wavelengths in the NIR II and NIR III windows offer deeper penetration and higher signal to noise ratio than those in the NIR I window. NIR imaging has indeed become a quickly evolving field and, simultaneously, stimulated the further development of new classes of NIR I-to-NIR II/III inorganic fluorescent probes, which include PbS, Ag2S-based quantum dots (QDs) and rare earth (RE) doped NPs (RENPs) that possess quite diverse optical properties and follow different emission mechanisms. This review summarizes the recent progress on material merits, synthetic routes, the rational choice of excitation in the NIR I window, NIR II/III emission optimization, and surface modification of aforementioned fluorescent probes. We also introduce the latest notable accomplishments enabled by these probes in fluorescence imaging, lifetime-based multiplexed imaging and photothermal therapy (PTT), together with a critical discussion of forthcoming challenges and perspectives for clinic use.

Adapalene inhibits ovarian cancer ES-2 cells growth by targeting glutamic-oxaloacetic transaminase 1.

Glutamic-oxaloacetic transaminase 1 (GOT1) regulates cellular metabolism through coordinating the utilization of carbohydrates and amino acids to meet nutrient requirements for sustained proliferation. As such, the GOT1 inhibitor may provide a new strategy for the treatment of various cancers. Adapalene has been approved by FDA for the treatment of acne, pimples and pustules, and it may also contribute to the adjunctive therapy for advanced stages of liver and colorectal cancers. In this work, we first examined the enzyme inhibition of over 500 compounds against GOT1 in vitro. As a result, Adapalene effectively inhibited GOT1 enzyme in a non-competitive manner. MST and DARTS assay further confirmed the high affinity between Adapalene and GOT1. Furthermore, the growth and migration of ovarian cancer ES-2 cells were obviously inhibited by the treatment of Adapalene. And it induced the apoptosis of ES-2 cells according to Western blot and Hoechst 33258 straining. In addition, molecular docking demonstrated that Adapalene coordinated in an allosteric site of GOT1 with low binding energy. Furthermore, knockdown of GOT1 in ES-2 cells decreased their anti-proliferative sensitivity to Adapalene. Together, our data strongly suggest Adapalene, as a GOT1 inhibitor, could be regarded as a potential drug candidate for ovarian cancer therapy.

Modeling Ramp-hold Indentation Measurements based on Kelvin-Voigt Fractional Derivative Model.

Interpretation of experimental data from micro- and nano-scale indentation testing is highly dependent on the constitutive model selected to relate measurements to mechanical properties. The Kelvin-Voigt Fractional Derivative model (KVFD) offers a compact set of viscoelastic features appropriate for characterizing soft biological materials. This paper provides a set of KVFD solutions for converting indentation testing data acquired for different geometries and scales into viscoelastic properties of soft materials. These solutions, which are mostly in closed-form, apply to ramp-hold relaxation, load-unload and ramp-load creep-testing protocols. We report on applications of these model solutions to macro- and nano-indentation testing of hydrogels, gastric cancer cells and ex vivo breast tissue samples using an Atomic Force Microscope (AFM). We also applied KVFD models to clinical ultrasonic breast data using a compression plate as required for elasticity imaging. Together the results show that KVFD models fit a broad range of experimental data with a correlation coefficient typically R2 > 0.99. For hydrogel samples, estimation of KVFD model parameters from test data using spherical indentation versus plate compression as well as ramp relaxation versus load-unload compression all agree within one standard deviation. Results from measurements made using macro- and nano-scale indentation agree in trend. For gastric cell and ex vivo breast tissue measurements, KVFD moduli are, respectively, 1/3 - 1/2 and 1/6 of the elasticity modulus found from the Sneddon model. In vivo breast tissue measurements yield model parameters consistent with literature results. The consistency of results found for a broad range of experimental parameters suggest the KVFD model is a reliable tool for exploring intrinsic features of the cell/tissue microenvironments.

Efficient Photoelectrochemical Water Oxidation on Hematite with Fluorine-Doped FeOOH and FeNiOOH as Dual Cocatalysts.

An effective cocatalyst is usually required to improve the performance of photoelectrochemical (PEC) water splitting catalysts. A fluorine-doped FeOOH (F:FeOOH) cocatalyst on a hematite photoanode was used to lower the onset potential by 140 mV and significantly improve the PEC performance. Moreover, a more effective dual cocatalytic system was prepared by subsequent loading of a FeNiOOH cocatalyst, which resulted in a further decrease of the onset potential by 270 mV. The final onset potential of the Fe2 O3 /F:FeOOH/FeNiOOH photoanode was lowered to 0.45 V versus the reversible hydrogen electrode (RHE), which is one of the lowest onset potential values ever reported for hematite photoanodes. The photocurrent also dramatically increased by a factor of approximately 3 to 0.9 mA cm-2 at 1.0 V versus RHE. Based on the structural, chemical, and electrochemical impedance spectroscopy characterization, the enhanced performance was attributed to the F:FeOOH overlayer, which reduced the surface recombination and accelerated the oxygen evolution reaction activity, and the FeNiOOH cocatalyst, which further enhanced the reaction kinetics. The facile preparation of the F:FeOOH cocatalyst and the design of the dual cocatalytic system will allow the development of high-performance hematite photoanodes.

Plasmonic Au-Loaded Hierarchical Hollow Porous TiO2 Spheres: Synergistic Catalysts for Nitroaromatic Reduction.

Plasmonic Au nanoparticle (NP)-loaded hierarchical hollow porous TiO2 spheres are designed and synthesized with the purpose of enhancing the overall catalytic activity by introducing the Au plasmonic effect into the system, where Au NPs themselves are catalytically active. The constructed nanohybrid exhibits both high activity in 4-nitrophenol reduction, compared to all of the previously reported Au-based catalysts, and high selectivity. The synergy of the inherent catalytic property of Au NPs and the plasmonic effect (mainly via hot electron transfer) under irradiation is confirmed by a series of control experiments. The specifically designed, porous hollow structure also greatly contributes to the good catalytic activity because it provides a large surface area, facilitates reactant adsorption, and hinders charge recombination. In addition, theoretical calculations reveal that such a structure also leads to an increase in light absorption of about 21% in the range of 400-800 nm with respect to a uniform water-TiO2 background featuring the same filling factor. This work provides insight into the rational design of plasmon-enhanced catalysts that will show their versatility in various electro-/photocatalysis.

Toward Enhancing Solar Cell Performance: An Effective and "Green" Additive.

Performance of bulk heterojunction polymer solar cells (PSCs) highly relies on the morphology of the photoactive layer involving conjugated polymers and fullerene derivatives as donors and acceptors, respectively. Herein, butylamine was found to be able to optimize the morphology of the donor/acceptor (D/A) film composed of a blend of poly(3-hexylthiophene-2,5-diyl) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM). Compared to the commonly used alkane dithiols and halogenated additives with high boiling points, butylamine has a much lower boiling point between 77 and 79 °C, and it is also much "greener". A specific interaction between butylamine and PCBM was demonstrated to account for the morphology improvement. Essentially, butylamine can selectively dissolve PCBM in the P3HT:PCBM blend and facilitate the diffusion of PCBM in the film fabrication processes. Atomic force microscopy and X-ray photoelectron spectroscopy investigations confirmed the formation of the P3HT-enriched top surface and the abundance of PCBM at the bottom side, i.e., the formation of vertical phase segregation, as a consequence of the specific PCBM-butylamine interaction. The D/A film with inhomogeneously distributed D and A components in the vertical film direction, with more P3HT at the hole extraction side and more PCBM at the electron extraction side, enables more efficient charge extraction in the D/A film, reflected by the largely enhanced fill factor. The power conversion efficiency of devices reached 4.03 and 4.61%, respectively, depending on the thickness of the D/A film, and these are among the best values reported for P3HT:PCBM-based devices. As compared to the devices fabricated without the introduction of butylamine under otherwise the same processing conditions, they represented 19.6 and 21.6% improvement in the efficiency, respectively. The discovery of butylamine as a new, effective additive in enhancing the performance of PSCs strongly suggests that the differential affinity of additives toward donors and acceptors likely plays a more important role in morphology optimization than their boiling point, different from what was reported previously. The finding provides useful information for realizing large-area PSC fabrication, where a "greener" additive is always preferred.

Advanced Fabrication of Chemically Bonded Graphene/TiO2 Continuous Fibers with Enhanced Broadband Photocatalytic Properties and Involved Mechanisms Exploration.

In this article, a novel route for the synthesis of graphene/TiO2 continuous fibers (GTF) using force-spinning combined with water vapor annealing method is reported for the first time. The morphology, structure and optical properties of the composite were fully characterized. With a single step of heat treatment process using steam at ambient conditions, we were able to initiate a series of chemical reactions, such as reduction of graphene oxide (GO), crystallization of TiO2, formation of C-Ti bond, and introduction of oxygen vacancies into TiO2. The incorporation of graphene in TiO2 fibers facilitated bandgap narrowing and improved photo-induced charge separation in the photocatalyst. As a result of synergistic effects, TiO2 fibers-2 wt% graphene (2%GTF) showed the highest photocatalytic activities in the degradation of X-3B under UV irradiation, superior to the benchmark photocatalyst P25. Under visible light irradiation, the same catalyst was about 4 times more efficient compared to pure TiO2 fibers (PTF). A detailed study of involved active species (in particular, ·, h+ and ·OH) unraveled the mechanism regarding photocatalysis.

Lack of IL-6 increases blood-brain barrier permeability in fungal meningitis.

The pathogenesis of increased blood-brain barrier permeability during Cryptococcus meningitis is still largely unknown. Interleukin (IL-6) is a multifunctional cytokine, and numerous studies have shown that IL-6 influences the integrity of the blood-brain barrier. In this study we investigated the role of IL-6 in Cryptococcus meningitis. First, wild-type or IL-6(-/-) mice were injected with Cryptococcus neoformans (C. neoformans) and the survival time in both groups was recorded. Second, the number of fungi was measured in the brains of IL-6(-/-) wild-type mice. Finally, the blood-brain barrier permeability index was detected in infected IL-6(-/-) mice treated with recombinant human IL-6. The blood-brain barrier permeability index was measured in infected wild-type mice treated with anti-IL-6 antibodies as well. The survival of IL-6(-/-) mice injected with C. neoformans was significantly lower than that of identically challenged wild-type mice. The infected IL-6(-/-) mice had significantly larger brain fungal burdens than wild-type mice. Furthermore, increased blood-brain barrier index was found in infected IL-6(-/-) mice when compared with that in infected control mice. Similar results were obtained when mice challenged with C. neoformans were treated systemically with neutralizing anti-IL-6 antibodies, resulting in an elevation of vascular permeability. Our data revealed that IL-6 reduced the blood-brain barrier permeability during Cryptococcus meningitis, and it might provide an explanation for the significantly lower survival of infected IL-6(-/-) mice.

Comparison of the pharmacokinetics of linezolid in burn and non-burn rabbits.

Linezolid is effective on many resistant organisms for the treatment of severe infections in burns. However, its pharmacokinetics was difficult to predict after major burns. The study aimed to describe the pharmacokinetic properties of linezolid administered intravenously at a dose of 10 mg/kg in severely burned rabbits in comparison to that in non-burns. Linezolid concentrations were quantitatively analyzed by high-performance liquid chromatography. The direct consequence of the physiological changes after burn injury was lower plasma linezolid concentrations. In addition, burn injury induced significantly altered pharmacokinetic parameters with higher inter-individual variability. The distribution volume and clearance rate were increased (2.88 vs. 1.92 L/kg, P > 0.05; 0.28 vs. 0.20 L/h/kg, P < 0.05), and the AUC0-∞ was significantly lower (37.99 vs. 51.47 mg/L h, P < 0.05). However, there were almost no changes in half-life and mean residence time. These results suggested that therapeutic drug monitoring and dosage individualization of linezolid in patients with severe burns were necessary.